you’ll want it to be roughly the buy canada goose jacket
Canada Goose Outlet PVC Keezer Collar Build Canada Goose Outlet
Canada Goose Parka Introduction: PVC Keezer Collar Build Canada Goose Parka
buy canada goose jacket cheap Have you ever sat gofind at home thinking to yourself that you would love a beer, but going to the store is too much? or that for your party, or the big game some beer taps would be excellent? Canada Goose Jackets well think no more: A keezer is right for you. buy canada goose jacket cheap
canadian goose jacket What is a “Keezer” you ask? canada goose uk shop that’s probably a good question too. its buy canada goose jacket cheap a portmanteau of freezer and keg (as seen in the common and related word: kegerator). basically its a deep freezer modified to have a colar and a set of taps for serving beer. canadian goose jacket
A keezer is a wonderful thing, but it seems canada goose store that everyone uses wood. and I don’t like that for a couple of reasons it breathes so if you live in a humid area you get excessive moisture canada goose build up, and its really doesn’t lend itself to insulation either. For this application I recommend PVC board: it doesn’t warp, cheap canada goose uk it doesn’t wick moisture, it doesn’t mold, its mildew resistant. It can Canada Goose Outlet be cut just as readily as wood, and with the same tools, and it Canada Goose online can be readily glued together.
canada goose coats The following is the solution I came up withStep 1: Step the First: Cuts canada goose coats
you can use any uk canada goose outlet freezer to make your keezer, but I decided to buy a brand new one.
canada goose clearance sale my freezer is a touch under 24x 48 Canada Goose sale so I bought 12′ lengths of each PVC board canada goose clearance sale
canada goose clearance 1 x 12′ 1×10 (measures 3/4 x 9 1/4 true) canada goose clearance
Canada Goose sale 1 x 12′ 1×3 (Measures 3/4 x 2 1/4 true) Canada Goose sale
1x 12′ 1×2 (measures 3/4 x 1 1/4 true)
canada goose coats on sale I chose 1×10″ PVC board for my collar as that will give me enough canada goose coats on sale height to have a keg on my compressor hump. this meant I had to be careful about the mitre cuts as many saws don’t have that kind of reach. canada goose coats on sale
canada goose I cut two x 48″ boards and two x 23 7/8″ boards from outside tip to outside tip with the textured side out and the flat side short. these Canada Goose online shop were then glued together with PVC glue (don’t forget to use clear primer). canada goose
canada goose store next I cut my seal edge, (the 1×3) but this time the 45 angle was perpendicular to how it had been on the previous cut. these were canada goose coats then mounted on top of the 10″ pieces so it formed an L shape. I used glue and screws canada goose uk outlet to mount these. canada goose store
cheap Canada Goose next I cut the 1×2 the same as uk canada goose the 1×3. I hadn’t initially purchased this part but the center of the lid has a bit of a “blister” that hangs down this canadian goose jacket ends up holding the lid up by about 3/8″ so I added this in to cheap Canada Goose mitigate that problem. I suppose you could skip the 3″ piece and such but I like having my foam insulation covered so I stayed with this. cheap Canada Goose
canada goose black friday sale take some tile with your caulking gun and some silicone to canada goose uk black friday seal up the whole collar now. canada goose black friday sale
I cut canada goose black friday sale some strips at 2″ wide and about 15″ long. you’ll want it to be roughly the buy canada goose jacket length of your collar height with a little extra for the length of your hinge. I think canada goose clearance sale I cut mine at 15″. test fit your lid on the collar when you measure it just to Canada Goose Parka be safe. I then traced the bolt pattern of the hinges on to them, and drilled them out. after being test fit, I gave them a coat of appliance white so that they don’t stand out.
Canada Goose online while you’re at this stage you want to look at tap placement. if your lid has a handle on it keep that in mind too. Canada Goose online
Canada Goose Jackets I put my taps centered in height of the collar. I went with 5 taps on 4″ centres, with the first tap 6″ from the outside edge. in retrospect I should have been a bit tighter to the side so that the lids handle didn’t block my last tap from having handles more than 4″ high. Canada Goose Jackets
canada goose deals I cut mine down on Canada Goose Coats On Sale the table saw so that I would have nice smooth canada goose factory sale regular cuts, but you can do it with a box cutter as well. canada goose deals
buy canada goose jacket once you have your insulation for the back side cut, you want to test fit it and drill a canada goose clearance hole through for your temperature Canada Goose Online probe wire. you can do this later, but its easier now. test fit all your insulation and then measure the inside dimensions buy canada goose jacket.
